0

Help with NextDNS Setup(UDM Pro & L3)

Could someone help me with setting up NextDNS while using a layer 3 network on my switch. My problem is I have everything working but device names are not reported. Do I need to edit the config values for listen/discovery-dns?

Network:

192.168.1.1 - VLan1(UDM Pro)(Router=UDM)

192.168.2.1 - Vlan2(Management-Switch/AccessPoints)(Router=UDM)

10.255.253.1/24 - VLan4040(Inter-VLAN routing)(Router=UDM)

192.168.3.1 - VLan3(Home)(Router=L3 Switch)

192.168.4.1 - VLan4(Kids)(Router=L3 Switch)

192.168.5.1 - VLan5(IoT)(Router=L3 Switch)

192.168.6.1 - VLan6(Guest)(Router=L3 Switch)

192.168.9.1 - VLan9(Talk)(Router=L3 Switch)

1 reply

null
    • If in doubt, ask someone to help!
    • Terry_Webbs
    • 3 yrs ago
    • Reported - view

    linuxfrag

    Challenges With Layer 3 Switches 

    Layer 3 switches cost more than ordinary switches but less than routers.
    Configuring and administering these switches and VLANs also requires additional effort.

    Home networks usually have no use for these devices, they lack WAN functionality and are not a replacement for routers.

    Each virtual LAN must be entered and port-mapped on the switch. Routing parameters for each VLAN interface must also be specified.

    You could try Solarwinds software and their engineers toolset to configure the Switch.
    The mac addresses might not be mapped to the IP Addresses properly - probably an issue with Layer 2 switches more than layer 3 ??!

Login to reply

Content aside

  • 3 yrs agoLast active
  • 1Replies
  • 250Views
  • 2 Following